Mobile Asset Management
- Utilities on Development
Mobile Asset Management
- Utilities on Development
Mobile Asset Management - What Makes a Good Mobile Solution?
The world is going mobile and the utilities, no matter how big or small, are going with it. Five electricity utilities and one contractor discussed their mobile future: Challenges aside, the new technologies bring benefits beyond just switching paper into tablets - they bring a possibility to start working in a whole different way, even renewing entire processes. Processes whose quality, in turn, is measured at major outages.
Today, utilities already use a variety of mobile solutions for various activities, like work order management, filling in data such as meter identification at a changeout, work hour reporting, safety and quality reporting, and even managing surveillance cameras at substations. On top of those, there are services for utility customers, for example, for checking their consumption data or reporting an outage. Also - and quite importantly - many of our customers have their field crews bring the network to the field in tablets or smartphones with Utility To Go. This is essencial, for example, in network planning, maintenance including component inspections, and operations both by in-house technicians and contractors.
“We have already got so many benefits out of mobile solutions,” says Jarno Virtanen, Managing Director at Nivos Palvelut. “It’s so much more efficient. There’s no longer running back and forth or doing all the phone calls, but instead, you can start problem-solving on the spot.”
“We have already got so many benefits out of mobile solutions,” says Jarno Virtanen, Managing Director at Nivos Palvelut. “It’s so much more efficient. There’s no longer running back and forth or doing all the phone calls, but instead, you can start problem-solving on the spot.”
The possibility for real-time data management brings welcomed changes to utility processes, since accessing or entering information is no longer dependent on where you are. Anders Svensson, Operating Engineer at Eskilstuna, describes: “For example, you have technicians go out, they need to know what the switching and feed-in are like, and having that information on mobile gives the ability to start the work out there without help from the office.” The same applies to any work that is carried out in the field.
Heikki Pirnes, Site Manager at Infratek Finland Oy, contractor for Elenia, points out: “For example at commissioning, if the technicians can directly fill in the data in the field, so many phases and people in between can be left out. And if there are changes, the technician will know immediately that that’s not where the cable goes, it’s here, and it can be fixed in real time. After all, the person who does the work has the best knowledge on the progress and what has been done, and so this serves the overall process incredibly well.”
“It will become simpler for users to work with mobile solutions,” reflects Eskil Tirén, Maintenance Engineer at Jämtkraft, Sweden. “You no longer need to be trained to use the various functionalities. Instead, everyone will be able to pick up a mobile device and use the solutions easily.”
And it only gets easier with device independency. Utilities today have their field crews use smartphones, tablets and even laptops out in the field, but the trend is settling more towards the tablet. “Tablets have a good-sized screen for map-based applications where you need to see a little larger area at a glance,” Heikki Pirnes explains, and Tuomas Kupila, Process Coordinator for Fault Repair at Elenia continues: “I believe there is an increasing demand for mobile systems in the future, but they must be built with a clear focus to get the full benefit out of them. They mustn’t be too complicated to use, but instead, usability is a core issue here. Utility To Go is a great example of what kind of a reception you get from the field crews with a light, easy-to-use application.”
Heikki Pirnes, Site Manager at Infratek Finland Oy, contractor for Elenia, points out: “For example at commissioning, if the technicians can directly fill in the data in the field, so many phases and people in between can be left out. And if there are changes, the technician will know immediately that that’s not where the cable goes, it’s here, and it can be fixed in real time. After all, the person who does the work has the best knowledge on the progress and what has been done, and so this serves the overall process incredibly well.”
“It will become simpler for users to work with mobile solutions,” reflects Eskil Tirén, Maintenance Engineer at Jämtkraft, Sweden. “You no longer need to be trained to use the various functionalities. Instead, everyone will be able to pick up a mobile device and use the solutions easily.”
And it only gets easier with device independency. Utilities today have their field crews use smartphones, tablets and even laptops out in the field, but the trend is settling more towards the tablet. “Tablets have a good-sized screen for map-based applications where you need to see a little larger area at a glance,” Heikki Pirnes explains, and Tuomas Kupila, Process Coordinator for Fault Repair at Elenia continues: “I believe there is an increasing demand for mobile systems in the future, but they must be built with a clear focus to get the full benefit out of them. They mustn’t be too complicated to use, but instead, usability is a core issue here. Utility To Go is a great example of what kind of a reception you get from the field crews with a light, easy-to-use application.”
Watch What Makes a Good Mobile Solution? on Youtube
However, the utilities acknowledge the fact that introducing new technology isn’t all smooth and easy, and the mobile readiness of the employees varies from digital natives to those who’d rather stick with the pen and paper. “One challenge is finding time in the organization for all of the personnel to become familiar with mobile,” Anders Svensson mentions, and continues: “We need to be able to create a clear big picture on what the mobile solutions are used for because it has positive effects in the long run.”
Luckily, the mindset towards going mobile is turning to the positive. Jarno Virtanen says: “In fact, some of our technicians refuse to work with anything else anymore. Instead, they want these solutions to be developed further.” At Nivos, mobile has been seen as something that helps your work, not as yet another system to be taken in. The utility has also made an effort to communicate the positive change that the mobility brings about. “We’ve even had deployment projects where, starting out with a pilot group, those who weren’t in that group felt unequal for not getting the new solution right away,” Virtanen adds.
Where there are efforts ongoing in each and every utility towards a mobile tomorrow, there is still work to be done. “You need to look at the entire work process that we have in the utility, and build a complete solution for mobile field work,” reflects Eskil Tirén. In addition, working with the electricity networks evidently means facing harsh weather conditions, storms and other unpredictable challenges. Tirén continues: “We have many areas outside normal connections, so the mobile solutions must also work properly offline.”
“I see a lot of potential in streamlining processes so that laborious steps can be left out,” Tuomas Kupila describes. “And to get the most out of it, it’s possible that we must start our thinking from a whole different angle, looking both at sharing responsibilities between people and the data flows from, say, one IT system to another. Today, there’s still often manual work involved. So looking at the entire process, where it actually starts and how to get till the end, some steps may not be needed, or their order or other interrelationships may change.” Along with that, a lot of the managerial work can be eliminated too, as with a good overall system, you no longer need a person to guide the daily operations. Everybody knows what the principles are to be followed.
Especially for a utility that’s facing a change from paper and Excel to mobile solutions of today, the change may seem immense. Jan Rondeel, CIO at Skagerak Nett, suggests another approach: “When we look at expanding and mobility, we have to change the way we think internally as well, because sometimes we want to have all the functionality before we start doing anything. But starting to think mobile, you have to think a bit more agile, maybe first giving field crews the overview of the grid in a mobile solution and then adding functionality, so we start getting benefits early.”
Luckily, the mindset towards going mobile is turning to the positive. Jarno Virtanen says: “In fact, some of our technicians refuse to work with anything else anymore. Instead, they want these solutions to be developed further.” At Nivos, mobile has been seen as something that helps your work, not as yet another system to be taken in. The utility has also made an effort to communicate the positive change that the mobility brings about. “We’ve even had deployment projects where, starting out with a pilot group, those who weren’t in that group felt unequal for not getting the new solution right away,” Virtanen adds.
Where there are efforts ongoing in each and every utility towards a mobile tomorrow, there is still work to be done. “You need to look at the entire work process that we have in the utility, and build a complete solution for mobile field work,” reflects Eskil Tirén. In addition, working with the electricity networks evidently means facing harsh weather conditions, storms and other unpredictable challenges. Tirén continues: “We have many areas outside normal connections, so the mobile solutions must also work properly offline.”
“I see a lot of potential in streamlining processes so that laborious steps can be left out,” Tuomas Kupila describes. “And to get the most out of it, it’s possible that we must start our thinking from a whole different angle, looking both at sharing responsibilities between people and the data flows from, say, one IT system to another. Today, there’s still often manual work involved. So looking at the entire process, where it actually starts and how to get till the end, some steps may not be needed, or their order or other interrelationships may change.” Along with that, a lot of the managerial work can be eliminated too, as with a good overall system, you no longer need a person to guide the daily operations. Everybody knows what the principles are to be followed.
Especially for a utility that’s facing a change from paper and Excel to mobile solutions of today, the change may seem immense. Jan Rondeel, CIO at Skagerak Nett, suggests another approach: “When we look at expanding and mobility, we have to change the way we think internally as well, because sometimes we want to have all the functionality before we start doing anything. But starting to think mobile, you have to think a bit more agile, maybe first giving field crews the overview of the grid in a mobile solution and then adding functionality, so we start getting benefits early.”
You may also like:
|
Go mobile with your assets
Trimble solutions for mobile field work support enable utilities to deliver network data from control room to the field and back. Empower field crews by giving them access to network and asset data in real-time with mobile applications.
|
Outage management outsourced
Elenia has outsourced 100% of its outage management to contractors in their LV network. Transparency, intelligent systems, and well-defined processes make their situational awareness top-notch.
|
